Select a State... AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingPuerto RicoU.S. Terrirories

WHAT's CHANGING IN 2023

Overview

The Department of Energy’s (DOE) new minimum efficiency requirements will begin on January 1, 2023. The changes affect all newly manufactured residential and manufactured housing air conditioners and heat pumps. Watch the video below for a quick overview of what to expect in 2023.

Looking back at SEER efficiency changes for residential split air conditioners

There are new, more stringent testing procedures to determine the SEER rating of units. The new testing methods more accurately reflect field conditions. The change in testing procedures will reduce efficiency ratings versus the current SEER, EER, and HSPF ratings. As such, new metrics and nomenclature were developed. To view the information on this page as a PDF, please click here.

TESTING AND MEASUREMENT REQUIRED CHANGES

2023 DOE changes will also require more stringent testing procedures.
A revised testing procedure will determine energy efficiency ratings for residential and manufactured housing equipment to more accurately reflect field conditions. The external static pressure, ESP, will be increased from 0.3” to 0.5” for residential housing and from .27” to .3” for manufactured housing. With the change in testing procedures, efficiency ratings will reduce vs. the current SEER, EER and HSPF ratings. As such, new metrics and nomenclature were developed. These changes apply ONLY to single-phase equipment.

The New Testing Will Reduce Energy Efficiency Ratings
2023 DOE changes will also require more stringent testing procedures. Since testing is more stringent, the minimum DOE efficiency requirements will be reduced for SEER2, EER2, and HSPF2 ratings versus the 2023 SEER, EER, and HSPF minimum requirements for each region. As an example, the current minimum requirement for the northern region is 13.0 SEER. Under the new requirement, the minimum will be 14.0 SEER or 13.4 SEER2.

Why the Reduction in Efficiency Rating
Increasing the external static pressure by 66% increases the blower motor watt usage, reducing the energy efficiency rating. Why the Reduction in Efficiency Rating The airflow set point on indoor blowers, including fan coils and furnaces, will also change.

What Else Changed
The airflow set point on indoor blowers, including fan coils and furnaces, will also change.

Equipment Testing
Unlike other efficiency requirement changes, the 2023 changes require manufacturers to retest every product tier. According to the new guidelines, each tier will need to be reoptimized and relaunched in accordance with the new DOE test procedure.

SECURING OUR FUTURE AS WELL AS OUR PARTNER’S FUTURE

We have been working behind the scenes for some time now to ensure our products are fully compliant with the new Department of Energy regulations. We are committed to helping make the transition as easy and painless as possible for our distributor and dealer/contractor partners. Here are a few things that we have been doing and will be offering to you.

• Updating all products to meet the 2023 requirements for air conditioners and heat pumps
• Updating our testing procedures to the new standards
• Video training for our partners on the DOE regulatory changes
• On-going training and support for our partners on the DOE regulatory changes.

Now is the Time to Prepare
Embracing the new guidelines now will have the least impact on your business. Now is the time to trian your eomployees on what they need to do. We are here to help you understand and navigate the 2023 eficiency changes.

---

FREQUENTLY ASKED QUESTIONS

QUESTION: Why is the DOE changing efficiency ratings?

ANSWER: Every six years, the Department of Energy is required by law to review the energy use of specific home appliances and mechanical systems. Based on their review, the Department determines that an increase in energy efficiencies is cost-justified, and they set the requirements accordingly.

QUESTION: Are there different product sell dates that I need to know?

ANSWER: Yes. Refer to the chart below.

DOE Product Class	New Standards Effective By
Residential North / National AC	Date of Mfg. – Sell-through allowed
Residential Southeast AC	Date of installation
Residential Southwest AC	Date of installation
Residential National HP	Date of Mfg. – Sell-through allowed

QUESTION: Why does my state have higher requirements?

ANSWER: Climate is a driving factor in the determination. In warmer climates, homeowners use more energy to cool their homes. Therefore, they represent the most significant opportunity for energy savings.

QUESTION: How do I know if I am located in a "regional standards state?"

ANSWER: Regional Standard states are located in the Southeast and Southwest Regions

Southeast Region	Southwest Region
Alabama, Arkansas, Delaware, Florida, Georgia, Hawaii, Kentucky, Louisiana, Maryland, Mississippi, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, Virginia, District of Columbia, and U.S. Territories	Arizona, California, Nevada, New Mexico

QUESTION: What are the 2023 SEER, HSPF-rated AC, and HP values?

2023 Values Applicable to SEER, HSPF-Rated AC and HP
Product	National All US States not otherwise listed as “regional standards states”		Southeast Regional Standards States Alabama, Arkansas, Delaware, Florida, Georgia, Hawaii, Kentucky, Louisiana, Maryland, Mississippi, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, Virginia, District of Columbia, and U.S. Territories.		Southwest Regional Standards States Arizona, California, Nevada or New Mexico
	SEER	HSPF	SEER	SEER	SEER
Split AC < 45K BTU	14.0		15.0	45.0	12.2/10.2*
Split AC ≥ 45K BTU	14.0		14.5	14.5	11.7/10.2*
Split HP	15.0	8.8	15.0	15.0

Split Air Conditioners - 2023 Regional Standards

For northern regions, any 13.0 SEER air conditioner built before January 1, 2023, can still be installed on or after January 1, 2023. In Southeast and Southwest regions, air conditioners that don’t meet the below requirements can not be installed on or after January 1, 2023, unless they meet the new 2023 minimum efficiencies listed in SEER.

System Type	North Region			Southeast Region			Southwest Region
Split System ACs AC < 45K BTU)	2015 Minimum Rating 13.0 SEER	New SEER	New SEER2	2015 Minimum Rating 14.0 SEER	New SEER	New SEER2	2015 Minimum Rating 14.0 SEER & 12.2 EER/ 11.7 EER ***	New SEER	New SEER2
		14.0 SEER	13.4 SEER2		15.0 SEER	14.3 SEER2		15.0 SEER and 12.2 EER*	14.3 SEER2 and 11.7 EER2**
Split System ACs (AC ≥ 45K BTU)		14.0 SEER	13.4 SEER2		14.5 SEER	13.8 SEER2		14.5 SEER and 11.7 EER*	13.8 SEER2 and 11.2 EER2**

Split System Heat Pumps - 2023 National Standards

Regardless of region, heat pump minimum efficiency requirements will increase to 14.3 SEER2. Split system heat pumps must also met a minimum 7.5 HSPF2. Any 14.0 SEER heat pump built before January 1, 2023, can stil be installed on or after January 1, 2023.

System Type	National Efficiency Standard
	2015 SEER and HSPF Minimum Rating	New SEER2 and HSPF2
Split System HPs	14.0 SEER and 8.2 HSPF	14.3 SEER2 and 7.5 HSPF2

Packaged Units - 2023 National Standards

Single-phase packaged unit minimum efficiency requirements will be 13.4 SEER2 and 6.7 HSPF2.

System Type	National Efficiency Standard
	2015 SEER and HSPF Minimum Rating	New SEER2 and HSPF2
Packaged Units	14.0 SEER and 8.0 HSPF	13.4 SEER2 and 6.7 HSPF2

---

ADDITIONAL RESOURCES

• U.S. DEPARTMENT OF ENERGY (energy.gov)
• U.S. ENVIRONMENTAL PROTECTION AGENCY (epa.gov)
• EPA AND DOE ENERGY EFFICIENCY (energystar.gov)
• U.S. GOVERNMENT'S NATIONAL ARCHIVES (federalregister.gov)